|
|
Laser transmitter with fiber
Hašek, Jaroslav ; Němeček, Jiří (referee) ; Wilfert, Otakar (advisor)
This master´s thesis deals with communication which is provided by optical devices. Optical wireless links are enforced due to high bit rate, responsibility and noise immunity. Main part of this master´s project is devoted to optical fibre, its characteristic and its usage in laser transmitter.
|
|
|
Wireless system for household appliances voice control
Potůček, Miroslav ; Háze, Jiří (referee) ; Sajdl, Ondřej (advisor)
The thesis deals with using the human voice for controlling electrical appliances by means of wireless technology. It concerns recognition of individual isolated words which form commands. A method based on the distance from the model is used for recognizing the words. The wireless communication is carried out by modules RFM 01/02 whose properties fully conform to the assignment. The practical realization of the network which is capable of switching on and off is described in this work. The network is designed to match the requirements of the task and to be economical.
|
|
|
Transmitter for professional microphone
Árva, Gábor ; Kubíček, Michal (referee) ; Kolouch, Jaromír (advisor)
This project deals with the design of a transmitter in a wireless microphone system, which connects to a microphone through an XLR connector. It contains detailed description of the individual blocks, which are necessary for processing and transmitting the signal received from the microphone. It discusses methods of frequency modulation using a phase locked loop and compares their advantages and disadvantages. As the last, it deals with the antenna selection and its shrinking methods.
|
|
|
Testing of the LTE basic parameters
Hocz, Jan ; Miloš, Jiří (referee) ; Hanus, Stanislav (advisor)
This thesis deals with brief introduction to LTE system and processing of signal in uplink and downlink. There is also presented some basic parameters that must be met for correctly working equipment in system. These parameters are divided for transmitter and receiver. From these parameters were chosen those, which can be measured in school labs with available measurement devices. For measuring these parameters were created instructions. For easier record of measured data was prepared protocol with blank tables.
|
|
|
TV Remote Controller
Bordács, Balázs ; Hála, Ondřej (referee) ; Hermany, Jiří (advisor)
This master’s thesis deals with parameters of the TV Remote Controller. Aim of this work is studying standards of remote controling of TV receiver by the way of infra-red light. For succesful solving of this project is important to learn about the theory of IrDA. In the second part ot this thesis is designed measurement unit for measuring the parameters of the remote control. The measurement unit includes an integrated IR receiver and photodiode for receive IR signals from remote control. The description of measurement unit blocks and principles of measuring parameters are also placed there. The final part is devoted to processing the measurement results of measuring levels and time waveforms of signal in the receiver module, directional characteristics of remote control and receiver. For measuremented unit is created laboratory task including the role specification and protocol.
|
|
|
Low-range high-speed optical transceiver
Pučálka, Jan ; Tošovský, Petr (referee) ; Kubíček, Michal (advisor)
The diploma thesis deals with description and design of a low-cost free-space optical (FSO) link. First, general FSO theory is discussed including their common parameters, properties and topologies. Further, optical signal sources and detectors are proposed. Finally, the selected implementation is described including its design and realization. The proposed FSO consists of two identical segments (modules) to form a full-duplex link. The FSO utilizes LED as a light source, maximum speed data rate is 100 Mb/s with 100Base-TX interface.
|
|
|
Secure PC Connection
Winter, Jan ; Škarvada, Jaroslav (referee) ; Kubek, Ján (advisor)
Aim of this master's thesis is the creation of serial communication interface for FITkit. This serial interface is a full duplex industrial bus based on 20mA loop circuit and it should allow connection of two FITkits by RS-485. Aim of this paper is to design simple software allowing communication of two FITkits and to secure this communication on RS-485 link against interference or transfer errors.
|
|
|
FITkit as a Remote Controller Transceiver
Růžek, Michal ; Strnadel, Josef (referee) ; Vašíček, Zdeněk (advisor)
The bachelor's thesis is about communication protocols used in infrared remote controls of consumer electronics. It describes widely used protocols such as RC5, NEC and SIRC, their properities and methods of decoding. Transceivers are realized via components inside FITkit's FPGA chip, using simple HW module. Demo application written in C language is also included.
|
|
| |
|
|
Design of suitable HW and SW components for remote data transmission
Pietrowicz, Daniel ; Marada, Tomáš (referee) ; Němec, Zdeněk (advisor)
This thesis is focused on the design of remote data transmission equipment, without access to mains power. The device will measure the voltage of the gas pipeline and send this information to the operator for processing. Analysis of today's technologies for long-distance transmission and based on the selected technology, the device will be designed. According to selected components, its power supply will be designed with the aim of long-term functionality and continuous operation.
|
guest ::
